# Installation de Ğchange-pod

**URL:** https://forum.duniter.org/t/installation-de-gchange-pod/7615
**Category:** Self-hosting
**Tags:** ğchange
**Created:** [26 September 2020 08:55 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615 "2020-09-26T08:55:50Z")
**Posts on this page:** 20
**Page:** 1

<div class="post-metadata">

### Author: ![tuxmain](https://forum.duniter.org/user_avatar/forum.duniter.org/tuxmain/32/6423_2.png) [@tuxmain](https://forum.duniter.org/u/tuxmain)
#### Post date: [26 September 2020 08:55 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/1 "2020-09-26T08:55:50Z")

</div>

J’ai installé Ğchange-pod selon la doc, mais il y a un problème avec Java&nbsp;:

```
$ ./elasticsearch
Unrecognized VM option 'UseParNewGC'
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.

```

J’ai installé le paquet `openjdk-11-jre` sur Debian Buster. Il semblerait que l’option `UseParNewGC` ait été supprimée dans openjdk 10, or le 9 a été supprimé des dépôts Debian.

@kimamila est-il possible de corriger ça ?

Sinon j’avais peur au début, mais en fait c’est très simple, pour l’instant. 🙂

---

<div class="post-metadata">

### Author: ![Frederic\_Renault](https://forum.duniter.org/user_avatar/forum.duniter.org/frederic_renault/32/3778_2.png) [@Frederic\_Renault](https://forum.duniter.org/u/Frederic_Renault)
#### Post date: [27 September 2020 12:08 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/2 "2020-09-27T12:08:56Z")

</div>

il faut enlever l option

> <https://github.com/duniter-gchange/gchange-pod/issues/11>
>
> trying to install
> but with on debian buster
> sudo apt-get install openjdk-11-jre
> ./elasticsearch
> Unrecognized VM option 'UseParNewGC'
> Error: Could not create the Java Virtual Machine.
> Error: A...

---

<div class="post-metadata">

### Author: ![tuxmain](https://forum.duniter.org/user_avatar/forum.duniter.org/tuxmain/32/6423_2.png) [@tuxmain](https://forum.duniter.org/u/tuxmain)
#### Post date: [27 September 2020 16:19 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/3 "2020-09-27T16:19:02Z")

</div>

Ah merci, ça marche. J’ai commenté la ligne avec cette option dans `bin/elasticsearch.in.sh`. Je pensais que c’était une option de compilation.

Là il prend beaucoup de CPU et de disque dur, apparemment le nœud officiel est arrêté donc il ne doit pas pouvoir se synchroniser.

---

<div class="post-metadata">

### Author: ![kimamila](https://forum.duniter.org/user_avatar/forum.duniter.org/kimamila/32/185_2.png) [@kimamila](https://forum.duniter.org/u/kimamila)
#### Post date: [27 September 2020 16:41 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/4 "2020-09-27T16:41:45Z")

</div>

Je le relance de suite… (pb de certificat SSL…)

---

<div class="post-metadata">

### Author: ![tuxmain](https://forum.duniter.org/user_avatar/forum.duniter.org/tuxmain/32/6423_2.png) [@tuxmain](https://forum.duniter.org/u/tuxmain)
#### Post date: [27 September 2020 16:44 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/5 "2020-09-27T16:44:33Z")

</div>

Mon nœud&nbsp;:  
`http://txmn.tk:9200`  
`https://txmn.tk:9240`

D’ailleurs, dans les paramètres de Ğchange, le nœud Ğchange est appelé «&nbsp;nœud Duniter&nbsp;»…

---

<div class="post-metadata">

### Author: ![kimamila](https://forum.duniter.org/user_avatar/forum.duniter.org/kimamila/32/185_2.png) [@kimamila](https://forum.duniter.org/u/kimamila)
#### Post date: [27 September 2020 16:59 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/6 "2020-09-27T16:59:43Z")

</div>

> [@tuxmain](#):
>
> D’ailleurs, dans les paramètres de Ğchange, le nœud Ğchange est appelé « nœud Duniter »…

C’est qu’en fait gchange utilise des accès à BMA (pour les paramètres de BC, le montant du DU, etc.)  
L’API spécifique à gchange sont isole, dans le code, et utilise le noeud présent ans les options avancé.

Mais… j’ai ajouté progressivement au Pod Gchange tout ce qu’il fallait de BMA, pour maintenant pouvoir accéder uniquement à un pod ghange.  
Il me reste donc à fusionner, dans les paramètres, le deux champs “noeud Duniter” et “noeud Gchange”. C’est sur ma liste de trucs à faire. Mais comme elle est longue… 🙂

---

<div class="post-metadata">

### Author: ![kimamila](https://forum.duniter.org/user_avatar/forum.duniter.org/kimamila/32/185_2.png) [@kimamila](https://forum.duniter.org/u/kimamila)
#### Post date: [27 September 2020 17:41 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/7 "2020-09-27T17:41:48Z")

</div>

J’ai ajouté ce problème et son contournement dans la doc : [https://github.com/duniter-gchange/gchange-pod/blob/master/src/site/markdown/install.md#troubleshooting](https://github.com/duniter-gchange/gchange-pod/blob/master/src/site/markdown/install.md#troubleshooting)

@tuxmain et @Frederic_Renault pourrez vous aider ceux qui veulent monter un pod ? Par exemple ici : [https://forum.monnaie-libre.fr/t/gchange-acces-technique-api-aux-annonces/12949/15?u=kimamila](https://forum.monnaie-libre.fr/t/gchange-acces-technique-api-aux-annonces/12949/15?u=kimamila)  
Merci !

---

<div class="post-metadata">

### Author: ![tuxmain](https://forum.duniter.org/user_avatar/forum.duniter.org/tuxmain/32/6423_2.png) [@tuxmain](https://forum.duniter.org/u/tuxmain)
#### Post date: [28 September 2020 08:23 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/8 "2020-09-28T08:23:59Z")

</div>

Dans Ğchange, les requêtes websocket vers mon nœud (txmn.tk:9200) font une erreur 400. Pourtant je n’ai pas de reverse-proxy qui pourrait filtrer ça, j’ai mis `0.0.0.0` comme adresse d’écoute. Il y a un reverse-proxy (stunnel4) pour https sur le port 9240.

---

<div class="post-metadata">

### Author: ![kimamila](https://forum.duniter.org/user_avatar/forum.duniter.org/kimamila/32/185_2.png) [@kimamila](https://forum.duniter.org/u/kimamila)
#### Post date: [28 September 2020 12:07 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/9 "2020-09-28T12:07:12Z")

</div>

Je crois qu’il faut forcer ton nginx a passer en http 1.1, comme pour les ws de Duniter.

---

<div class="post-metadata">

### Author: ![tuxmain](https://forum.duniter.org/user_avatar/forum.duniter.org/tuxmain/32/6423_2.png) [@tuxmain](https://forum.duniter.org/u/tuxmain)
#### Post date: [28 September 2020 15:35 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/10 "2020-09-28T15:35:54Z")

</div>

Ça marche !

Il n’a pas toutes les annonces (par exemple, la seule annonce que j’ai publiée et qu’il a date de 10 mois, alors qu’il y en a des plus récentes). Ça se synchronise tout seul au cours du temps ou pas ? Il faut peut-être le redémarrer pour qu’il se resynchronise, maintenant que la config réseau fonctionne ?

> **Config Apache**
>
> ```
> <VirtualHost *:9200 [::]:9200>
> ServerName txmn.tk
> ServerAdmin tuxmain@txmn.tk
> Protocols h2 http/1.1
>     
> RewriteEngine On
> RewriteCond %{HTTP:Upgrade} websocket [NC]
> RewriteRule /(.*) ws://127.0.0.1:9199/$1 [P,L]
>     
> ProxyPreserveHost On
> ProxyRequests Off
> ProxyTimeout 600
>     
> ProxyPass /ws/ ws://127.0.0.1:9199
> <Location />
> ProxyPass http://127.0.0.1:9199/
> </Location>
>     
> ErrorLog ${APACHE_LOG_DIR}/gchangepod.error.log
> CustomLog ${APACHE_LOG_DIR}/gchangepod.access.log common env=!dontlog
> </VirtualHost>
> 
> <IfModule mod_ssl.c>
> <VirtualHost *:9240 [::]:9240>
> ServerName txmn.tk
> ServerAdmin tuxmain@txmn.tk
> Protocols h2 http/1.1
>         
> SSLEngine on
> SSLCertificateFile /etc/letsencrypt/live/txmn.tk/fullchain.pem
> SSLCertificateKeyFile /etc/letsencrypt/live/txmn.tk/privkey.pem
>         
> RewriteEngine On
> RewriteCond %{HTTP:Upgrade} websocket [NC]
> RewriteRule /(.*) ws://127.0.0.1:9199/$1 [P,L]
>         
> ProxyPreserveHost On
> ProxyRequests Off
> ProxyTimeout 600
>         
> ProxyPass /ws/ ws://127.0.0.1:9199
> <Location />
> ProxyPass http://127.0.0.1:9199/
> </Location>
>         
> ErrorLog ${APACHE_LOG_DIR}/gchangepod.error.log
> CustomLog ${APACHE_LOG_DIR}/gchangepod.access.log common env=!dontlog
> </VirtualHost>
> </IfModule>
> 
> ```
> 
> Ne pas oublier d’activer les modules&nbsp;:
> 
> ```
> sudo a2enmod proxy
> sudo a2enmod proxy_http
> sudo a2enmod proxy_wstunnel
> 
> ```

---

<div class="post-metadata">

### Author: ![kimamila](https://forum.duniter.org/user_avatar/forum.duniter.org/kimamila/32/185_2.png) [@kimamila](https://forum.duniter.org/u/kimamila)
#### Post date: [28 September 2020 18:28 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/11 "2020-09-28T18:28:14Z")

</div>

Tu peux tenter oui, un redémarrage.  
Voir si ça ne marche pas, supprimer dans data/ puis relancer.

---

<div class="post-metadata">

### Author: ![kimamila](https://forum.duniter.org/user_avatar/forum.duniter.org/kimamila/32/185_2.png) [@kimamila](https://forum.duniter.org/u/kimamila)
#### Post date: [2 March 2021 20:50 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/12 "2021-03-02T20:50:54Z")

</div>

> [@tuxmain](#):
>
> J’ai installé le paquet `openjdk-11-jre` sur Debian Buster. Il semblerait que l’option `UseParNewGC` ait été supprimée dans openjdk 10, or le 9 a été supprimé des dépôts Debian.

Au final ton pod a fonctionné avec un JDK 11 ?

---

<div class="post-metadata">

### Author: ![tuxmain](https://forum.duniter.org/user_avatar/forum.duniter.org/tuxmain/32/6423_2.png) [@tuxmain](https://forum.duniter.org/u/tuxmain)
#### Post date: [2 March 2021 21:36 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/13 "2021-03-02T21:36:50Z")

</div>

Non, du coup j’ai abandonné… mais je peux réessayer sur mon RPi 4 (Raspbian Buster).

---

<div class="post-metadata">

### Author: ![kimamila](https://forum.duniter.org/user_avatar/forum.duniter.org/kimamila/32/185_2.png) [@kimamila](https://forum.duniter.org/u/kimamila)
#### Post date: [2 March 2021 21:38 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/14 "2021-03-02T21:38:06Z")

</div>

Cela ne m’étonne pas, du coup. Il faut une JDK 1.8.  
Cf la doc 🙂

> **[Cesium+ pod – Install](http://doc.e-is.pro/cesium-plus-pod/install.html)**

---

<div class="post-metadata">

### Author: ![shaolinux](https://forum.duniter.org/user_avatar/forum.duniter.org/shaolinux/32/4290_2.png) [@shaolinux](https://forum.duniter.org/u/shaolinux)
#### Post date: [3 March 2021 16:16 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/15 "2021-03-03T16:16:21Z")

</div>

Ce qui a bien marché pour moi, c’est d’installer openjdk-8-jre en suivant les indications données sur ce site :

> **[Installation | AdoptOpenJDK](https://adoptopenjdk.net/installation.html?variant=openjdk8&jvmVariant=hotspot#)**
>
> AdoptOpenJDK provides prebuilt OpenJDK binaries from a fully open source set of build scripts and infrastructure. Supported platforms include Linux, macOS, Windows, ARM, Solaris, and AIX.

Sous debian c’est facile d’ajouter le dépôt pour apt, pour les autres OS il y a aussi toutes les indications.

---

<div class="post-metadata">

### Author: ![poka](https://forum.duniter.org/user_avatar/forum.duniter.org/poka/32/6827_2.png) [@poka](https://forum.duniter.org/u/poka)
#### Post date: [13 March 2021 01:53 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/16 "2021-03-13T01:53:29Z")

</div>

Ce weekend, je vais installer l’ensemble de l’environnement de dev pour les pods Cs+/Gchange ainsi que les clients gchange et Cs en mode dev.

J’ai fait un pad pour m’organiser dans cette installation en mode dev, que j’alimenterai au fur et à mesure:

[https://pad.p2p.legal/axiom-g1\_datapod](https://pad.p2p.legal/axiom-g1_datapod)

Je vous tiendrais au courant de mes échecs/réussites ici du coup 🙂

---

<div class="post-metadata">

### Author: ![poka](https://forum.duniter.org/user_avatar/forum.duniter.org/poka/32/6827_2.png) [@poka](https://forum.duniter.org/u/poka)
#### Post date: [14 March 2021 00:52 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/17 "2021-03-14T00:52:49Z")

</div>

J’ai mis à jour mon pad.

---

<div class="post-metadata">

### Author: ![nicoals](https://forum.duniter.org/user_avatar/forum.duniter.org/nicoals/32/8712_2.png) [@nicoals](https://forum.duniter.org/u/nicoals)
#### Post date: [12 April 2021 08:04 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/18 "2021-04-12T08:04:46Z")

</div>

Salut.

Du coup, existe-t’il actuellement d’autres installations (_“instances”_) de Ğchange que **[www.gchange.fr](http://www.gchange.fr)**? Il y a t’il une liste ?

---

<div class="post-metadata">

### Author: ![kimamila](https://forum.duniter.org/user_avatar/forum.duniter.org/kimamila/32/185_2.png) [@kimamila](https://forum.duniter.org/u/kimamila)
#### Post date: [13 April 2021 20:31 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/19 "2021-04-13T20:31:42Z")

</div>

Instance web ? Ou Pod ?  
Il y a deux Pod pour le site [gchange.fr](http://gchange.fr)

Et une instance web www.gchange.es avec un pod pour l’Espagne

---

<div class="post-metadata">

### Author: ![fdrubigny](https://forum.duniter.org/user_avatar/forum.duniter.org/fdrubigny/32/8678_2.png) [@fdrubigny](https://forum.duniter.org/u/fdrubigny)
#### Post date: [21 November 2021 13:55 UTC](https://forum.duniter.org/t/installation-de-gchange-pod/7615/20 "2021-11-21T13:55:54Z")

</div>

Je reviens ici car j’essaie d’installer un Pod Gchange.  
J’ai suivi la procédure idem que pour mon Noeud Césium+  
Mais j’obtiens une erreur que voici :

```auto
./elasticsearch
log4j:ERROR setFile(null,true) call failed.
java.io.FileNotFoundException: /home/admin/gchange-pod-1.7.1/logs/gchange-pod-adn-life.log (Permission non accordée)
	at java.io.FileOutputStream.open0(Native Method)
	at java.io.FileOutputStream.open(FileOutputStream.java:270)
	at java.io.FileOutputStream.<init>(FileOutputStream.java:213)
	at java.io.FileOutputStream.<init>(FileOutputStream.java:133)
	at org.apache.log4j.FileAppender.setFile(FileAppender.java:294)
	at org.apache.log4j.FileAppender.activateOptions(FileAppender.java:165)
	at org.apache.log4j.DailyRollingFileAppender.activateOptions(DailyRollingFileAppender.java:223)
	at org.apache.log4j.config.PropertySetter.activate(PropertySetter.java:307)
	at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:172)
	at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:104)
	at org.apache.log4j.PropertyConfigurator.parseAppender(PropertyConfigurator.java:842)
	at org.apache.log4j.PropertyConfigurator.parseCategory(PropertyConfigurator.java:768)
	at org.apache.log4j.PropertyConfigurator.configureRootCategory(PropertyConfigurator.java:648)
	at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:514)
	at org.apache.log4j.PropertyConfigurator.configure(PropertyConfigurator.java:440)
	at org.elasticsearch.common.logging.log4j.LogConfigurator.configure(LogConfigurator.java:128)
	at org.elasticsearch.bootstrap.Bootstrap.init(Bootstrap.java:259)
	at org.elasticsearch.bootstrap.Elasticsearch.main(Elasticsearch.java:45)
log4j:ERROR Either File or DatePattern options are not set for appender [file].
log4j:ERROR setFile(null,true) call failed.
java.io.FileNotFoundException: /home/admin/gchange-pod-1.7.1/logs/gchange-pod-adn-life_deprecation.log (Permission non accordée)
	at java.io.FileOutputStream.open0(Native Method)
	at java.io.FileOutputStream.open(FileOutputStream.java:270)
	at java.io.FileOutputStream.<init>(FileOutputStream.java:213)
	at java.io.FileOutputStream.<init>(FileOutputStream.java:133)
	at org.apache.log4j.FileAppender.setFile(FileAppender.java:294)
	at org.apache.log4j.FileAppender.activateOptions(FileAppender.java:165)
	at org.apache.log4j.DailyRollingFileAppender.activateOptions(DailyRollingFileAppender.java:223)
	at org.apache.log4j.config.PropertySetter.activate(PropertySetter.java:307)
	at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:172)
	at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:104)
	at org.apache.log4j.PropertyConfigurator.parseAppender(PropertyConfigurator.java:842)
	at org.apache.log4j.PropertyConfigurator.parseCategory(PropertyConfigurator.java:768)
	at org.apache.log4j.PropertyConfigurator.parseCatsAndRenderers(PropertyConfigurator.java:672)
	at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:516)
	at org.apache.log4j.PropertyConfigurator.configure(PropertyConfigurator.java:440)
	at org.elasticsearch.common.logging.log4j.LogConfigurator.configure(LogConfigurator.java:128)
	at org.elasticsearch.bootstrap.Bootstrap.init(Bootstrap.java:259)
	at org.elasticsearch.bootstrap.Elasticsearch.main(Elasticsearch.java:45)
log4j:ERROR Either File or DatePattern options are not set for appender [deprecation_log_file].
log4j:ERROR setFile(null,true) call failed.
java.io.FileNotFoundException: /home/admin/gchange-pod-1.7.1/logs/gchange-pod-adn-life_index_indexing_slowlog.log (Permission non accordée)
	at java.io.FileOutputStream.open0(Native Method)
	at java.io.FileOutputStream.open(FileOutputStream.java:270)
	at java.io.FileOutputStream.<init>(FileOutputStream.java:213)
	at java.io.FileOutputStream.<init>(FileOutputStream.java:133)
	at org.apache.log4j.FileAppender.setFile(FileAppender.java:294)
	at org.apache.log4j.FileAppender.activateOptions(FileAppender.java:165)
	at org.apache.log4j.DailyRollingFileAppender.activateOptions(DailyRollingFileAppender.java:223)
	at org.apache.log4j.config.PropertySetter.activate(PropertySetter.java:307)
	at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:172)
	at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:104)
	at org.apache.log4j.PropertyConfigurator.parseAppender(PropertyConfigurator.java:842)
	at org.apache.log4j.PropertyConfigurator.parseCategory(PropertyConfigurator.java:768)
	at org.apache.log4j.PropertyConfigurator.parseCatsAndRenderers(PropertyConfigurator.java:672)
	at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:516)
	at org.apache.log4j.PropertyConfigurator.configure(PropertyConfigurator.java:440)
	at org.elasticsearch.common.logging.log4j.LogConfigurator.configure(LogConfigurator.java:128)
	at org.elasticsearch.bootstrap.Bootstrap.init(Bootstrap.java:259)
	at org.elasticsearch.bootstrap.Elasticsearch.main(Elasticsearch.java:45)
log4j:ERROR Either File or DatePattern options are not set for appender [index_indexing_slow_log_file].
log4j:ERROR setFile(null,true) call failed.
java.io.FileNotFoundException: /home/admin/gchange-pod-1.7.1/logs/gchange-pod-adn-life_index_search_slowlog.log (Permission non accordée)
	at java.io.FileOutputStream.open0(Native Method)
	at java.io.FileOutputStream.open(FileOutputStream.java:270)
	at java.io.FileOutputStream.<init>(FileOutputStream.java:213)
	at java.io.FileOutputStream.<init>(FileOutputStream.java:133)
	at org.apache.log4j.FileAppender.setFile(FileAppender.java:294)
	at org.apache.log4j.FileAppender.activateOptions(FileAppender.java:165)
	at org.apache.log4j.DailyRollingFileAppender.activateOptions(DailyRollingFileAppender.java:223)
	at org.apache.log4j.config.PropertySetter.activate(PropertySetter.java:307)
	at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:172)
	at org.apache.log4j.config.PropertySetter.setProperties(PropertySetter.java:104)
	at org.apache.log4j.PropertyConfigurator.parseAppender(PropertyConfigurator.java:842)
	at org.apache.log4j.PropertyConfigurator.parseCategory(PropertyConfigurator.java:768)
	at org.apache.log4j.PropertyConfigurator.parseCatsAndRenderers(PropertyConfigurator.java:672)
	at org.apache.log4j.PropertyConfigurator.doConfigure(PropertyConfigurator.java:516)
	at org.apache.log4j.PropertyConfigurator.configure(PropertyConfigurator.java:440)
	at org.elasticsearch.common.logging.log4j.LogConfigurator.configure(LogConfigurator.java:128)
	at org.elasticsearch.bootstrap.Bootstrap.init(Bootstrap.java:259)
	at org.elasticsearch.bootstrap.Elasticsearch.main(Elasticsearch.java:45)
log4j:ERROR Either File or DatePattern options are not set for appender [index_search_slow_log_file].
[2021-11-21 14:44:41,191][INFO][node] [node-gchange-adn-life] version[2.4.6], pid[1478], build[5376dca/2017-07-18T12:17:44Z]
[2021-11-21 14:44:41,192][INFO][node] [node-gchange-adn-life] initializing ...
[2021-11-21 14:44:41,625][INFO][plugins] [node-gchange-adn-life] modules [reindex, lang-expression, lang-groovy], plugins [mapper-attachments, cesium-plus-pod-core, cesium-plus-pod-subscription, cesium-plus-pod-user, gchange-pod-es-plugin], sites []
Exception in thread "main" java.lang.IllegalStateException: Failed to created node environment
Likely root cause: java.nio.file.AccessDeniedException: /home/admin/gchange-pod-1.7.1/data
	at sun.nio.fs.UnixException.translateToIOException(UnixException.java:84)
	at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:102)
	at sun.nio.fs.UnixException.rethrowAsIOException(UnixException.java:107)
	at sun.nio.fs.UnixFileSystemProvider.createDirectory(UnixFileSystemProvider.java:384)
	at java.nio.file.Files.createDirectory(Files.java:674)
	at java.nio.file.Files.createAndCheckIsDirectory(Files.java:781)
	at java.nio.file.Files.createDirectories(Files.java:767)
	at org.elasticsearch.env.NodeEnvironment.<init>(NodeEnvironment.java:169)
	at org.elasticsearch.node.Node.<init>(Node.java:165)
	at org.elasticsearch.node.Node.<init>(Node.java:140)
	at org.elasticsearch.node.NodeBuilder.build(NodeBuilder.java:143)
	at org.elasticsearch.bootstrap.Bootstrap.setup(Bootstrap.java:194)
	at org.elasticsearch.bootstrap.Bootstrap.init(Bootstrap.java:286)
	at org.elasticsearch.bootstrap.Elasticsearch.main(Elasticsearch.java:45)
Refer to the log for complete error details.

```

Voilà si @kimamila @bpresles passent par là, merci pour votre retour d’infos.  
Amicalement,  
Francis

[Next page](https://forum.duniter.org/t/installation-de-gchange-pod/7615.md?page=2)
